GEM 533 eSyStep Operating Instructions Manual page 29

12.4.7 Hardware Revision
The circuit boards' version can be read out with the Hardware Revision parameter.
The hardware version is displayed with the 2-digit version number of the basic assembly and the 2-digit version number of the
OPEN/CLOSED or positioner assembly.
Index Sub- Off-
Index set
0x16 0
12.4.8 Firmware Revision
The software version can be read out with the Firmware Revision parameter.
Index Sub- Off-
Index set
0x17 0
12.4.9 Application Specific Tag
A text with 32 characters can be stored in the device with the Application Specific Tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off-
Index set
0x18 0
12.4.10 Function Tag
A text with 32 characters can be stored in the device with the Function Tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off-
Index set
0x19 0
12.4.11 Location Tag
A text with 32 characters can be stored in the device with the Location Tag parameter.
For example, installation location, function, installation date, etc.
Index Sub- Off-
Index set
0x20 0
12.4.12 Actuator Size
The actuator size can be read out in numbers with the Actuator Size parameter.
In- Sub- Off- Access
dex In- set Rights
dex
0x40 0 RO
www.gemu-group.com
Access Length
Rights
RO 10 bytes Hardware Revision
Access Length
Rights
RO 9 bytes Firmware Revision
Access Length
Rights
R/W 32 bytes App. Spec. Tag
Access Length
Rights
R/W 32 bytes
Access Length
Rights
R/W 32 bytes
Length Parameter
2 bits Actuator Size
Parameter Type
StringT
Parameter Type
StringT
Parameter Type
StringT
Parameter Type
Function Tag StringT
Parameter Type
Location Tag StringT
Type
uint: 8
29 / 52
12 Specific data IO-Link (pin 6)
Values
"Rev. XX/XX"
Values
"V X.X.X.X"
Values
"****************"
Values
"****************"
Values
"****************"
Default Values
0 0 → size 0
1 → size 1
2 → size 2
Positioner (Code S0)
GEMÜ 533