GEM 1441 cPos-X Manual

GEMÜ 1441 cPos-X
Intelligent electro-pneumatic positioner
Description
The GEMÜ 1441 cPos-X is an intelligent, digital electro-pneumatic positioner in 2-wire technology used to control pneumatically
operated process valves. It can be combined with single acting or double acting linear actuators or quarter turn actuators. This
means that it can be used, among other things, for diaphragm, globe and diaphragm globe valves as well as for ball valves and
butterfly valves, for instance. The positioner has a robust housing with a covered LCD display for status information. The posi-
tioner can be operated remotely using a mobile device in order to configure settings and to view detailed information.
Technical specifications
• Ambient temperature: -10 to 60 °C
• Operating pressure : 1.5 to 7 bar
• Mode of action: Double acting l Single acting
• Flow rate: 115 Nl/min
• Linear measuring range: 2 to 75 mm
• Radial measuring range: 0 - 90°
• Supply voltage: Via set value signal
• Electrical connection types: M16 cable gland l M12 plug
• Communication modes: BLE l HART
• Conformity: FCC
Technical data depends on the respective configuration
Features
• 2-wire-connection technology
• Quick commissioning using well-balanced preconfiguration
• HART communication available upon request
• "Fail safe" and "Fail freeze" safety function available
• BLE communication for remote access and configuration
• Almost no air consumption when idle
further information
webcode: GW-1441