GEM 533 eSyStep Operating Instructions Manual page 34

12 Specific data IO-Link (pin 6)
12.4.19 Position feedback
Settings for valve position detection can be stored with the Position Feedback parameter.
In- Sub- Off- Access
dex In- set Rights
dex
0x51 1 R/W
2 R/W
Description of parameter values
Parameter
Actuator Position
Feedback (3.0 to 97.0%)
Open Request
Actuator Position
Feedback (3.0 to 97.0%)
Close Request
12.4.20 Initialized Positions
The analogue values of the initialized valve positions can be read out with the Initialized Positions parameter.
In- Sub- Off- Access
dex In- set Rights
dex
0x53 1 RO
2 RO
3 RO
Description of parameter values
Parameter
Open
Close
Stroke
GEMÜ 533
Positioner (Code S0)
Length Parameter
10 bits Actuator Position
Feedback Open Re-
quest
10 bits Actuator Position
Feedback Close Re-
quest
Values
30 to 970 Determine the switch point for the OPEN end position.
30 to 970 Determine the switch point for the CLOSED end position.
Length Parameter
12 bits Open
12 bits Closed
12 bits Stroke
Values
0 to 4092 Read out the OPEN position analogue value.
0 to 4092 Read out the CLOSED position analogue value.
0 to 4092 Read out the analogue value for stroke (difference between OPEN and CLOSED).
Type Default
uint:16
(90.0%)
uint:16
(10.0%)
Description
Type Default
uint:16
uint:16 4092
uint:16
Description
34 / 52
Values
900 30 to 970
(3.0 to 97.0%)
100 30 to 970
(3.0 to 97.0%)
Values
0 0 to 4092
0 to 4092
0 0 to 4092
www.gemu-group.com