Muratec F-110 Operating Instructions Manual page 74

All manuals and user guides at all-guides.com
5. Press START/ENTER when the name appears correctly or without
entering a name. The display asks you to select another location.
6. To store more speed dial numbers, repeat steps 2 through 5.
Or,
To return to Standby mode, press STOP.
Editing a Number for Speed Dialling
1. Press and hold SPEED(#) for 2 seconds.
2. Enter the 2-digit location number where the phone number you want
to edit has been stored, then press START/ENTER. The display
shows the number.
Sxx:05512637522
3. Press ➛ or ❿ to move the cursor to the desired number and edit the
number.
Note: When you press the speed dial number stored for group dial, the
display briefly shows 'G - REGISTERED' to indicate that the
number is used for group dial, you can then edit the number.
4. When you have finished editing, press START/ENTER.
Sending a Fax Using a Speed Number
1. Load the document face down with the top edge first going into the
document feeder.
2. Press SPEED(#), then enter a 2-digit speed dial location number.
3. Press START/ENTER to dial the number. The number will dial
automatically and transmit when the remote fax machine answers.
3.25
Stand-alone Fax