Muratec F-110 Operating Instructions Manual page 115

5. Click Save. You will see the name in the Overlay List box.
6. Click OK or Yes until you complete the creation.
Note: The overlay document size must be the same as documents you
Using Page Overlay
After an overlay has been created, it is ready to be printed with your
document. To print an overlay with a document:
1. Create or open the document you want to print.
2. When you change the print settings from your software application,
3. Click the Overlays tab, and select the desired overlay from the
4. If the desired overlay file does not appear in the Overlay List box,
4.22
Printing
All manuals and user guides at all-guides.com
The file is not printed out. Instead it will be stored on your computer
HDD disk.
will print with the overlay.
access the printer properties. See
properties.
Overlay List box.
click Load Overlay, and select the overlay file.
If you have stored the overlay file you want to use into an external
source, you can also load the file when you access this Load Overlay
window.
page 4.9 to access the printer