Muratec F-110 Operating Instructions Manual page 92

All manuals and user guides at all-guides.com
Editing Group Dial Numbers
You can edit one-touch or speed dial numbers stored for group dialling.
1. Press SET UP on the front panel.
The display shows the first menu; FAX NAME/NUMBER.
2. Press ➛¤or ❿ until you find 'GROUP DIAL SETUP', then press
START/ENTER.
3. Press the one-touch group dial button used for the group dial
number you want to edit.
4. Press ➛¤or ❿ to select the option you want, then press
START/ENTER.
Select MEMBER ADD to add a number, and enter as many numbers
as needed. To stop entering numbers, press START/ENTER. Note
that you cannot include one group number in another group dial
number.
Select MEMBER DELETE to delete a number. When the number that
you want to delete is displayed, press START/ENTER.
5. When you are finished editing, press STOP.
Sending a Fax Using Group Dialing
(Multi-Address Transmission)
You can use Group Dialing for the Delayed Transmission or Memory
Transmission.
Follow the procedure of the desired operation (Broadcasting transmission
- page 3.29, Delayed transmission -
you to enter the remote fax number, press the one-touch button where
you stored the group number. You can use only one group number for
each operation. Continue the procedure to complete the desired
operation.
The machine will automatically scan the document into memory and dial
each of the numbers included in the group.
page 3.30). When the display asks
Stand-alone Fax
3.43