Muratec F-110 Operating Instructions Manual page 137

Hide thumbs Also See for F-110:
Table of Contents

Advertisement

Display
NO PAPER
OVER HEAT
PAPER JAM 0
PAPER JAM 2
POLLING ERROR
POWER FAILURE
RECEIVE ERROR
RETRY REDIAL ?
SEND ERROR
TONER EMPTY
TONER LOW
WARMING UP
6.6
Troubleshooting
All manuals and user guides at all-guides.com
Meaning
The recording paper has run
out.
The printer head has
overheated.
Recording paper has jammed in
the paper feeding area.
Jammed paper still remains
inside the unit.
The remote fax machine you
want to poll is not ready to
respond to your poll.
Or
When setting up to poll another
fax machine, you have used an
incorrect poll code.
A power failure has occurred.
A fax has not been received
successfully.
The machine is waiting for a
specified time interval to redial
a previously busy station.
Your fax has not gone through
successfully.
The toner cartridge has run out.
The machine stops.
The toner is almost empty.
The printer is warming up and
is off-line.
Solution
Load the recording paper.
Please wait until it cools down.
If you cannot solve the problem,
please call for service.
Press STOP and clear the jam.
See
page
6.1.
Clear the jam. See
page
The remote operator should know
in advance that you are polling
and should have their fax unit
loaded with the original
document.
Enter the correct poll code.
If documents have been stored in
the memory, a 'Power Failure
Report' will be automatically
printed when the power is
restored.
A communication error has
occurred. Ask the sender to try
again.
You can press START/ENTER to
immediately redial, or STOP to
cancel the redial operation.
A communication error has
occurred. Try again.
Replace with a new toner
cartridge.
Take out the toner cartridge and
gently shake it. By doing this,
you can temporarily re-establish
printing operations.
Wait until the machine is on-line.
6.1.

Advertisement

Table of Contents
loading

Table of Contents