Muratec F-110 Operating Instructions Manual page 99

Notes:
• Make sure that you select the Manual for Paper Source and the
• When you use the manual paper tray, the paper must be loaded in the
1. Place the print media in the manual input tray with print side facing
4.6
Printing
All manuals and user guides at all-guides.com
correct paper size and type from your software application before
starting your print job. See
automatic paper tray. By doing so, you can prevent a paper jam which
could occur in the manual tray.
up and adjust the paper guides to the width of the print media.
• Load a sheet of the envelope with the flap side facing away from
you. Make sure that the stamp area is at the top left and the end of
the envelope where the stamp area enters the tray.
• Load transparencies face up with the adhesive strip on top
going into the tray first.
page 4.10.