Setting Up Stand-Alone Fax System; Setting Volume - Muratec F-110 Operating Instructions Manual

Setting up Stand-
alone Fax System

Setting Volume

Ringer Volume
You can adjust the volume of the ringer to your desired volume.
1. Press ➛ or ❿ in Standby mode.
2. Press ➛ or ❿ until you find your desired loudness. Four levels are
3. Press START/ENTER to save the setting.
Speaker Volume
1. Press OH HOOK DIAL/VOICE REQUEST to adjust the speaker
2. Press ➛ or ❿ repeatedly until you find the desired loudness.
3. After choosing the desired volume level, press OH HOOK
All manuals and user guides at all-guides.com
The display shows the current ringer volume setting.
RINGER VOL.[2]
available; 0~3.
You will hear the selected volume and the display will show the level.
Setting '0' turns the ringer off. The machine will work normally even if
the ringer is set to off.
volume. If you cannot hear a dial tone, check the phone line
connection.
The display will show the current volume level.
SPEAKER VOL.[2]
DIAL/VOICE REQUEST.
3.1
Stand-alone Fax