Muratec F-110 Operating Instructions Manual page 80

All manuals and user guides at all-guides.com
6. If you want to send to more than one location, repeat steps 4 and 5.
Note: You cannot use Group dial numbers for another fax number.
Or,
To send to one location or when you complete the last fax number
setting, press START/ENTER.
7. The display asks you to enter a name. If you want to assign a name
to the transmission, enter the name. If not, skip this step.
For details on how to enter the name using the numeric keypad, see
page 3.20.
8. Press START/ENTER. The display will show the current time and asks
you at what time is the fax to be sent.
TIME(10:30)10:30
9. Enter the time by using the numeric keypad, then press
START/ENTER.
Enter the time in 24-hour format. For example, enter 2230 for 10:30
P.M. If you set a time earlier than the current time, the document will
be sent at that time on the following day.
10. The document will be scanned into memory. The display shows the
memory capacity and the number of pages being stored.
11. The machine returns to Standby mode and the display will alternate
messages as a reminder that you are in Standby mode and that a
Delayed Transmission is set.
Note: To cancel the operation reserved in memory, see 'Cancelling a
Scheduled Operation' on
The current time
page 3.35.
3.31
Stand-alone Fax