Muratec F-110 Operating Instructions Manual page 91

5. The display asks you to press a one-touch button or to enter a 2-digit
6. Press the one-touch button where the fax number you wish to include
7. Press START/ENTER. The display will show the fax number which
8. Repeat step 6 to 7 to enter additional numbers into the selected
9. Press START/ENTER when you have entered all the desired
10. To assign a name to the group, enter the desired name.
11. Press START/ENTER. The display will ask you to select a one-touch
12. To continue storing, press the desired one-touch button and repeat
13. To stop storing, press STOP. The display will return to Standby
Note: You cannot include one group dial number in another group dial
3.42
Stand-alone Fax
All manuals and user guides at all-guides.com
speed dial number that you wish to include in the group.
in the group is stored.
Or,
Enter a 2-digit speed dial location where the fax number you wish to
include in the group is stored.
was stored in the selected location.
group.
destinations. The display will then ask you to enter a name.
See page 3.20 for entering letters.
Or,
If you do not want to assign a name, skip this procedure.
number for another group dial.
steps 4 through 11.
mode.
number.