Muratec F-110 Operating Instructions Manual page 146

AaBbCc
All manuals and user guides at all-guides.com
AaBbCc
AaBbCc
Problem
Loose toner
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Character Voids
A
Horizontal stripes
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Possible Cause and Remedy
• Clean the inside of the printer.
• Check the paper type and quality. See "Paper Type and
Size" for faxing on page 1.17
for PC printing on page
• Try installing a new toner cartridge.
• If the problem persists, the printer may require repairs.
Contact a service representative.
Character voids are white areas within the parts of characters
that should be solid black:
• If you are using transparencies when you experience this
problem, try another type of transparency. (Because of the
composition of transparency media, some character voids
are normal.)
• You may be printing on the wrong surface on the paper.
Remove the paper and turn it around.
• The paper may not meet paper specifications. See "Paper
Type and Size" for faxing on
Media" for PC printing on
If horizontally aligned black streaks or smears appear:
• The toner cartridge may not be installed properly. Remove
the cartridge and reinsert it.
• The toner cartridge may be defective. Install a new toner
cartridge.
• If the problem persists, the printer may require repairs.
Contact a service representative.
and "Selecting Print Media"
4.1.
page 1.17 and "Selecting Print
page 4.1.
Troubleshooting
6.15