Additional Functions; Sending A Flash; Monitoring A Dual Job Status - Muratec F-110 Operating Instructions Manual

Additional Functions

3.36
Stand-alone Fax
All manuals and user guides at all-guides.com

Sending a Flash

Some special phone services require a switch-hook signal for proper
operation. For example, if you have call-waiting, you can put a call on
hold and take a second call on the same line by pressing
FLASH/STATUS.
1. When you are on the telephone and hear the call waiting signal,
press FLASH/STATUS once. The first caller is on hold
and you are speaking to the second caller.
2. Press FLASH/STATUS again to talk to the first caller again.
Note: If you do not have a special service that uses the switch-hook
signal, do not press FLASH/STATUS during a call. If you do, you
could disconnect the line.

Monitoring a Dual Job Status

Your machine can perform more than one function at once. For example,
you can;
• Receive a fax into the memory while making a copy.
• Store a fax document for later transmission while printing an incoming
fax.
When the machine performs dual tasks, press FLASH/STATUS to see
the current status on the display of the other operation. Each time you
press FLASH/STATUS, the current status of the two operations displays
alternatively.