Muratec F-110 Operating Instructions Manual page 145

Problem
Page skew
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Curl or wave
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Wrinkles or creases
Back of printouts dirty
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Black pages
6.14
Troubleshooting
All manuals and user guides at all-guides.com
AaBbCc
Possible Cause and Remedy
AaBbCc
AaBbCc
• Check the paper type and quality. See "Paper Type and
AaBbCc
Size" for faxing on
AaBbCc
for PC printing on
• Make sure that the paper or other media is loaded
correctly and the guides are not too tight or too loose
against the paper stack.
• Check the paper type and quality. Both high temperature
and humidity will cause paper to curl. See "Paper Type and
Size" for faxing on
for PC printing on
• Turn over the stack of paper in the input tray. Also try
rotating the paper 180° in the input tray.
• Make sure that paper is loaded properly.
• Check the paper type and quality. See "Paper Type and
Size" for faxing on
for PC printing on
• Turn over the stack of paper in the input tray. Also try
rotating the paper 180° in the tray.
• The transfer roller area may be dirty. See "Cleaning the
Inside" on page
• Check to see if the toner is leaking. Clean inside the
machine. See
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
• The toner cartridge may not be installed properly. Remove
the cartridge and reinsert it.
• The toner cartridge may be defective and need replacing.
Install a new toner cartridge.
• The printer may require repairs. Contact a service
representative.
page 1.17 and "Selecting Print Media"
page 4.1.
AaBbCc
AaBbCc
AaBbCc
page 1.17 AaBbCc and "Selecting Print Media"
AaBbCc
page 4.1.
page 1.17 and "Selecting Print Media"
page 4.1.
5.4.
page 5.4.