Muratec F-110 Operating Instructions Manual page 24

All manuals and user guides at all-guides.com
To Connect to a Wall Jack that has Only One Phone Line
1. Plug the enclosed telephone cord into the jack on the back of the unit
marked by the word LINE.
2. If a telephone cord is plugged into the wall jack, unplug the cord and
set it aside.
3. Plug the other end of the phone cord into the wall jack.
Notes:
• If you are connecting other devices such as a telephone to the phone
line, go to Appendix "Connecting Other Devices To the Phone Line" on
page A.1.
• If you are not connecting other devices, go to "Plugging In the Power"
on page 1.15.
To Connect to a Wall Jack that Has Two Phone Lines
1. Plug the telephone cord into the jack on the back of the unit marked
by the word LINE.
2. If a telephone cord is plugged into the wall jack, unplug it and set it
aside.
3. If you do not have a wall jack that has a built-in splitter, plug a phone
unit splitter (not included) into the wall jack.
4. Plug the cord into the side of the phone unit splitter for the fax
number.
Notes:
• If you are connecting other devices such as a telephone to the same
phone line, go to Appendix "Connecting Other Devices To the Phone
Line" on page A.1.
• If you are not connecting other devices, go to "Plugging In the Power"
on page 1.15.
To a standard
phone wall jack
1.13
Getting Started