Speed Dialling - Muratec F-110 Operating Instructions Manual

Using Address Label
A One-touch label sheet is included with your machine. As you store
numbers in one-touch dial buttons, make a note of the numbers on the
label to remind you which number is stored in each position.
1. Remove the clear cover and
2. Write information on the

Speed Dialling

You can store up to 80 numbers in 2-digit Speed Dial locations (01-80).
Storing a Number for Speed Dialling
1. Press and hold SPEED(#) for about 2 seconds.
2. Enter a 2-digit location number (01 through 80) where you want to
3. Enter the number you want to store, then press START/ENTER.
4. To assign a name to the number, enter the desired name. For
3.24
Stand-alone Fax
All manuals and user guides at all-guides.com
label.
label and replace the label
and cover.
You may want to use pencil
in case you wish to change
these numbers later.
LOC. [01-80] ❿##
store a number, then press START/ENTER.
If a number has already been stored in a location, the display shows
the number. To edit the number, see the
Sxx:05512637522
information on how to enter names, see
If you do not want to assign a name, skip this step.
next page.
where xx represents the
speed location you have
selected at step 2.
page 3.20.