Kodak HEALTH SCIENCES MINILOADER 2 Plus Low Voltage Stand-Alone Installation Instructions Manual page 30

II 3420 INSTALLATION INSTRUCTIONS
The stand shown below would be suitable for a STAND-ALONE MINILOADER. The addition of a solid TOP
would reduce the noise caused by vibration. The use of some sound insulation material between the TOP and
the MINILOADER would further reduce the noise.
ALL DIMENSIONS ARE IN MILLIMETRES - NOT TO SCALE - DO NOT SCALE.
The CASTORS should be adjustable for height and should be capable of carrying a load of 50 Kg each. All
construction should be painted steel.
This design is not suitable for a PROCESSOR INTERFACE MINILOADER.
© Kodak Ltd. Page II-30 January 1995