Kodak HEALTH SCIENCES MINILOADER 2 Plus Low Voltage Stand-Alone Installation Instructions Manual page 10

II 3420
19. Discard the parts shown in FIGURE 9, but replace the CLIP which retains the ACCESS PANEL in place.
Figure 9
20. Fit the FAN GRID, using the original SCREWS, but adding the M4 STAR WASHERS. IMPORTANT
- THE PAINT MUST BE REMOVED FROM THE FRAME WHERE THE STAR WASHERS
CONTACT IT. See FIGURE 10.
Screw
© Kodak Ltd.
Discard these parts
Screw
Grid
Figure 10
INSTALLATION INSTRUCTIONS
New Star Washers
Remove paint
here
Page II-10
Replace the clip here
Screw
Grid
January 1995