Kodak HEALTH SCIENCES MINILOADER 2 Plus Low Voltage Stand-Alone Installation Instructions Manual page 24

II 3420
CHECK LIST FOR COMPLETING THE INSTALLATION.
NOTE :- Remember that any adjustments, part replaced etc. should not be fed back as PURPOSE CODE XN.
The correct feedback code for the problem solved should be used.
Check the modification status of the MINILOADER 2 PLUS LOW VOLTAGE. Order any type 1 required
modifications necessary. Check the SOFTWARE is the latest version, and the correct language variant for your
country is fitted. All MINILOADERS are delivered with language variant 1 - See TABLE.
MINILOADER VERSION
Stand-Alone
Processor Interface
Processor Interface
Processor Interface
If the MAINS PLUG is fused, a 5 Amp fuse should be fitted, otherwise the socket the MINILOADER is
plugged into should be protected by a 5 or 6 Amp fuse. If the MINILOADER is powered from the
PROCESSOR, the PROCESSOR should be modified to provide a fused supply. Follow local practice
and regulations.
1. Check that the voltage tappings of the TRANSFORMER in the MINILOADER are set to the correct
measured supply voltage. See the TABLE and DRAWING below.
MEASURED VOLTAGE
95 - 104
105 - 114
115 - 126
210 - 225
226- 235
236 - 252
© Kodak Ltd.
LANGUAGE
English/Swedish
English/German/Italian/French
English/Spanish/Portuguese/Swedish
English/Norwegian
TAPPING
100
110
120
220
230
240
Page II-24
INSTALLATION INSTRUCTIONS
VARIANT
1
1
2
3
CONNECTION
TB2-2
TB2-3
TB2-4
TB2-5
TB2-6
TB2-7
January 1995