Daikin RXSQ24TAVJU Service Manual page 119

SiUS331708EA
Optional Kit Setting (UV lamp + Humidifier + Economizer) (for FXTQ-TA and CXTQ-TA models)
Mode No.
14 (24)
Residential Dry (for FXTQ-TA and CXTQ-TA models)
Mode No.
14 (24)
Mold Proof Operation Setting (for FXEQ-P models)
Mode No.
14 (24)
∗ Areas with average humidity over 80%.
Gas Furnace Test Mode (for CXTQ-TA models)
This setting is used for gas furnace test run.
For details, refer to Gas Furnace Test Operation on page 135.
Mode No.
14 (24)
Drain Pump Operation Settings (for FXMQ-PB models)
The drain pump operation can be disabled for natural drainage by changing the following field setting.
Mode No.
15 (25)
Field Settings and Test Operation
First Code No. Second Code No.
4
First Code No. Second Code No.
5
First Code No. Second Code No.
9
First Code No. Second Code No.
11
First Code No. Second Code No.
0
UV lamp + humidifier fan
speed
01 Refer to controller
02 High
03 Refer to controller
04 High
05 Refer to controller
06 High
07 Refer to controller
08 High
09 Refer to controller
10 High
11 Refer to controller
12 High
13 Refer to controller
14 High
01 Set temperature: room temperature
02 Set temperature: same as cooling set temperature
01
02
03
01
02
03
01
02
03
Field Settings from Remote Controller
Contents
Economizer setting for
Mech standby duration
(minutes)
10
10
20
20
30
30
40
40
50
50
60
60
Free cooling only
Free cooling only
Contents
Contents
—
Standard
For high humidity areas (∗)
Contents
OFF
Low heat
High heat
Contents
—
ON
OFF
106