List Of Field Settings For Indoor Unit - Daikin RXSQ24TAVJU Service Manual

Field Settings from Remote Controller
1.3

List of Field Settings for Indoor Unit

Mode First
No. Code
(∗2) No.
Filter sign setting
(Setting for display time to
clean air filter)
0
(Sets display time to clean air
filter to half when there is
heavy filter contamination.)
0 (∗7) Filter sign setting
1 Ultra long life filter sign setting
1 (∗7) Filter cleaning sign time (Light/Heavy)
10(20)
2 Selection of thermistor
2 (∗11) Remote sensor and remote controller thermistor
3 Filter cleaning sign
Information for intelligent Touch Manager /
5 (∗14)
intelligent Touch Controller
Remote controller thermostat control during the
6
group control
7 (∗9) Time for absence area detection
1 Auxiliary electric heater ON temperature: Ton
2 Auxiliary electric heater OFF temperature: Toff
3 Setting the airflow rate when heating
3 (∗6) Electric heater setting
3 (∗10) Gas furnace setting
5 (∗6) Electric heater capacity setting
11(21)
6 (∗9) Setting the rate of human detection
7 Airflow adjustment
8 (∗9) Compensating the temperature around people
9 (∗9) Compensating the floor temperature
Optional output switching
0
(field selection of output for adaptor for wiring)
External ON/OFF input
1 (Set when ON/OFF is to be controlled from
outside.)
Thermostat switching
12(22)
2
(Set when remote sensor is to be used)
3 Airflow setting when heating thermostat is OFF
4 Setting of operation mode to AUTO
5 Auto restart after power failure reset
6 Airflow setting when cooling thermostat is OFF
91
Setting Contents
Ultra long life
filter
Long life filter
Standard
filter
Second Code No.
01
Approx.
10,000
hrs.
Approx.
Light Heavy
2,500
hrs.
Approx.
200 hrs.
Light Heavy
Long life filter Ultra long life filter
2,500/1,250 10,000/5,000
Remote controller
Only suction air
thermistor + Suction
thermistor
air thermistor
Only remote
—
sensor thermistor
Displayed Not displayed
Refer to page 96 for details.
Remote controller Remote controller
thermostat control thermostat control
is not permitted is permitted
30 minutes 60 minutes
Refer to page 97 for details.
Standard Slightly increased
Refer to page 98 for details.
Refer to page 98 for details.
Refer to page 99 for details.
High sensitivity Low sensitivity
Completion of
OFF
airflow adjustment
Priorities given on
Suction air
the suction air
temperature only
temperature
–4°C (–7.2°F) –2°C (–3.6°F)
Refer to page 101 for details.
Refer to page 101 for details.
1°C (1.8°F) 0.5°C (0.9°F)
LL tap Set fan speed
Refer to page 102 for details.
Not equipped Equipped
LL tap Set fan speed
SiUS331708EA
: Factory setting
02 03
Approx.
5,000
hrs.
Approx.
—
1,250
hrs.
Approx.
100 hrs.
—
—
—
Only remote
controller
thermistor
Only remote
controller
thermistor
—
—
—
Increased
Standard
sensitivity
Start of airflow
adjustment
Standard
0°C (0°F)
—
OFF (∗8)
—
OFF (∗8)
Field Settings and Test Operation
04
—
—
—
—
—
—
—
—
—
—
Infrared
presence
sensor
disabled
—
Priorities given
on the floor
temperature
+2°C (+3.6°F)
—
—
—
—