Canon imagePRESS C910 Customer Expectation Document page 39

Max Ring Binder Pedestal Setup
IMPORTANT
• If the MAX Ring Binder is attached to the machine, and there is Canon
Finishing equipment attached after the Ring Binder, make sure that there is
approximately 105" (2,667 mm) of space added to the left side of the machine.
This space can be reduced to 19.7" (500 mm) if the pedestal ramps are placed
in the front or back of the machine.
• If the MAX Ring Binder's pedestal ramps are required, and are attached to the
front or the back of the machine, make sure to add approximately
51.2" (1,295 mm) of space to the front or back of the machine.
• The MAX Ring Binder requires the DFD Output Height 860 mm Kit.
Version 5 imagePRESS C910/C810/C710 Customer Expectations Document
imagePRESS C910/C810/C710 Customer Expectations Document
Three Pedestals with Ramp to the Left Side
Three Pedestals with Ramp to the Front
Page 39