Canon imagePRESS C910 Customer Expectation Document page 21

IMPORTANT
• Only one finisher and only one puncher unit, depending on the finisher, can be
selected.
• The Two-Knife Booklet Trimmer-A1 and SDD Square Fold Booklet-Maker with
Two-Knife Trimmer cannot be installed together.
• Only one High Capacity Stacker-H1 can be attached to the machine.
• The SDD BLM300C finishing system must be the final in-line accessory attached
to the machine.
• The only accessories that can be attached to the machine after the MAX Ring
Binder are the Staple Finisher-W1 PRO or Booklet Finisher-W1 PRO, Booklet
Trimmer-F1, and Two-Knife Booklet Trimmer-A1. These options require
pedestals to make the feeding slots of the finishing accessories even with the
output slot of the MAX Ring Binder.
• Only one DFD Finisher can be included in a configuration. DFD finishers include:
Plockmatic BLM50/35, SDD BLM300C, Max Ring Binder, and Plockmatic
Multi-Purpose Stacker.
• The Plockmatic Multi-Purpose Stacker (available later) is supported by the
imagePRESS C910 and imagePRESS C810 only.
Version 5 imagePRESS C910/C810/C710 Customer Expectations Document
imagePRESS C910/C810/C710 Customer Expectations Document
Page 21