Table of Contents
Advertisement
6.18 High Capacity Stacker-H1
IMPORTANT
• The High Capacity Stacker-H1 does not support envelope sizes smaller than
5.5" x 7.2", such as No.10 (COM10) and Monarch (even in the Pass-Through
mode).
• Only one High Capacity Stacker can be configured with each engine.
Item
Long Sheet Requirements
Paper Size
Paper Weight
Paper Type
Paper Capacity
Number of Trays
Tray Capacity
(LTR paper (20 lb bond
2
(80 g/m
))
Stacking Modes
Interface
Power Source
Maximum Power
Consumption
Dimensions (W x D x H)
Weight
25 When the eject tray is extended.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
Requires the HCS Long Sheet Tray-C1
than 13" x 19") to the top tray of High Capacity Stacker-H1.
13" x 19", 12" x 18", 11" x 17", LGL, LTR, LTRR, STMTR, EXEC, EXECR,
and Irregular Size (5.5" x 7.2" to 13" x 19.2"
(140 mm x 182 mm to 330.2 mm x 487.7 mm))
14 lb bond to 129 lb cover (52 to 350 g/m
Plain, Offset, Coated, Transparency, Recycled, Preprinted, Tab, Labels,
Texture, Die cuts
Approximately 6,200 sheets maximum (Including the top tray)
3 trays
Top Tray:
Stack Tray (Internal): Up to 3,000 sheets (or 14" (355 mm) in height)
Eject Tray (External): Up to 3,000 sheets (or 14" (355 mm) in height)
Straight, Offset
The optional DFD (Document Finishing Device) connects the High Capacity
Stacker-H1 with various third party finishers.
120V AC, 60 Hz, 10A
Off:
Less than 0.5 W
Ready: Less than 15 W
In Use: Less than 300 W
Approximately 35.4" x 29.3" (49.2"
(899 mm x 744 mm (1,250 mm
Approximately 264.6 lb (120 kg)
imagePRESS C910/C810/C710 Customer Expectations Document
Specifications
to output long sheets (longer
2
)
Up to 200 sheets (or 0.8" (20 mm) in height)
25
) x 44.9"
25
) x 1,140 mm)
Page 63
Advertisement
Table of Contents
