Table of Contents
Advertisement
6.37 MAX Ring Binder
Item
Required Equipment
Paper Size
Paper Weight
Paper Type
Punch Patterns
Punch Hole Diameter
Binding Capability
93
Stacking Capacity
Cartridge Capacity
Waste Tray Capacity
Modes
Power Source
Maximum Power
Consumption
Dimensions (H x W x D)
Weight
88
The DFD Interface Kit-A1 and DFD PATH-B1 (H=860) are required when the High Capacity Stacker-H1 is attached.
93
Paper curl may affect the stacking capacity.
94
Sheets must be fed from the long-edge, face down, and the header at the top. The trailing edge must be the binding edge.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
High Capacity Stacker-H1
OR
DFD Adapter and Finisher Bridge Unit
LTR, Tab Paper (9" x 11")
17 lb bond to 80 lb cover (64 to 216 g/m
Plain, Heavy, Recycled, Color, Bond, Tab Paper, Coated, Transparencies, Postcard
LTR (21 holes)
Approximately 1/4" (6.35 mm)
Small:
Up to 50 sheets with a maximum document thickness of 0.22" (5.5 mm)
Large:
Up to 100 sheets with a maximum document thickness of 0.43" (11 mm)
10 sheets:
25 books
50 sheets:
16 books
100 sheets:
11 books (max)
80 pieces maximum
10,000 sheets (17 lb bond (64 g/m
94
Binding Mode
:
Punching Mode:
120 to 127 V AC, 60 Hz, 2.8 A
Approximately 400 W
43.8" x 33.9" x 25.8" (1,113 mm x 860 mm x 655 mm)
Approximately 330 lb (150 kg)
imagePRESS C910/C810/C710 Customer Expectations Document
Specifications
88
2
)
2
))
Transferred papers are bound on the rear, long-edge of LTR
paper.
Transferred papers are punched on the rear long-edge of the
paper, and stacked in the stacking tray.
Page 93
Advertisement
Table of Contents
