6.34.2 SDD 2-Knife Trimmer STR6702 Specifications
Item
Required Equipment
Booklet Size
Minimum
85
(Length)
Maximum
Booklet Width (X)
Supported Paper Weight
Maximum Booklet Thickness
Trim Amount
Asymmetrical Trim
Booklet Staple Clearance
from Top/Bottom (Minimal)
Speed
87
Power Source
Dimensions (H x W x D)
Weight
6.34.3 SDD Rotator RTM6940 Specifications
Item
Supported Paper size
Supported Paper Weight
87
Power Source
Dimensions (H x W x D)
Weight
85
Booklet heights between 320 mm and 340 mm must be trimmed to 320 mm or less.
86
On booklets of approximately 20 sheets or more, always use cover sheets that weigh 120 g/m
deviations.
87
Can only be connected to an approved electrical system, which is rated at a maximum of 16 A, and is protected by circuit
breakers.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
SDD Front Trimmer BLT6989
Before Trimming
8.07" (205 mm)
13.4" (340 mm)
Approximately 2" to 9.6" (50 mm to 245 mm)
86
16 lb bond to 110 lb cover (60 to 300 g/m
Trimming:
Up to 0.2" (5 mm)
Bypass:
Up to 0.23" (6 mm)
Approximately 0.08" to 1.38" (2 mm to 35 mm) each side
Approximately ±0.59" (±15 mm)
Approximately 1.57" (40 mm)
LTRR:
Up to 1,800 booklets/hour
11" x 17":
Up to 1,800 booklets/hour
From the SDD BLM300C Professional Booklet Maker
Operational:
On Pallet in Box:
Operational:
On Pallet in Box:
Rotation Enabled:
LTR, 9" x 12",
Custom Short Edge: 8" to 9.05" (203 mm to 230 mm)
Custom Long Edge: 8" to 12.6" (203 mm to 320 mm)
Rotation Disabled (Bypass):
11" x 17"
Custom Short Edge: 8" to 12.6" (203 mm to 320 mm),
Custom Long Edge: 8" to 20" (203 mm to 508 mm)
16 lb bond to 110 lb cover (60 to 300 g/m
120V, 15 A, NEMA 5-15P
Operational:
On Pallet in Box:
Operational:
On Pallet in Box:
imagePRESS C910/C810/C710 Customer Expectations Document
Specifications
Bypass
5.9" (150 mm)
12.6" (320 mm)
2
)
43 3/8" x 23 5/8" x 27 1/2" (1,110 mm x 600 mm x 700 mm)
61 7/8" x 47 1/4" x 31 1/2" (1,570 mm x 1,200 mm x 800 mm)
Approximately 451.9 lb (205 kg)
Approximately 595.2 lb (270 kg)
Specifications
2
)
42 1/8" x 26 3/4" x 26 3/8" (1,070 mm x 680 mm x 670 mm)
61 7/8" x 47 1/4" x 31 1/2" (1,570 mm x 1,200 mm x 800 mm)
Approximately 286.6 lb (130 kg)
Approximately 440.9 lb (200 kg)
Trimmed
7.9" (200 mm)
12.6" (320 mm)
2
or heavier to prevent trimming
Page 87