Table of Contents
Advertisement
6.36 Plockmatic Multi-Purpose Stacker
The Plockmatic Multi-Purpose Stacker will be available later.
Item
Supported Devices
Required Equipment
Maximum Stack Height
Maximum Stack Weight Approximately 88.2 lb (40 kg)
Supported Paper Size
Supported Paper
91
Weight
Supported Paper Types Plain, Coated, Recycled, and Pre-punched
Maximum Curl Level
Paper Size Change
Side Registration
Adjustment
Power source
Dimensions (H x W x D)
Weight
Temperature Range
Humidity Range
84 The DFD Interface Kit-A1 and DFD PATH-A1 (H=1002) are required when the High Capacity Stacker-H1
is attached.
91 Media less than 39 lb bond (148 g/m
and line speed.
92 Stacking of thinner paper with curl, may cause the paper to jam or not stack properly.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
imagePRESS C910
imagePRESS C810
High Capacity Stacker-H1
OR
DFD Adapter and Finisher Bridge Unit
Finisher Bridge Height Kit 1002-A1
For sheets less than 25.6" (600 mm), maximum stack height is
approximately 11.8" (300 mm)
For sheets longer than 25.6" (600 mm), maximum stack height is
approximately 5.3" (135 mm)
8.5" x 11" (long edge), 9" x 12" (long edge), 11" x 17", 12" x 18", Custom
Size (8.27" x 11" (210 mm x 280 mm) to 13" x 30"(330 mm x 762 mm))
39 lb bond to 150 lb cover (148 g/m
92
0.2" (5 mm) flat curl, measured on a flat surface
Manual change of paper size
Mechanical side guides, operator adjusted
100-240 V, 50-60 Hz, 2 A
Approximately 41.8" x 35.4" x 26.8" (1,060 mm x 900 mm x 680 mm)
Width expandable to approximately 55" (1,410 mm)
Lift Unit:
Approximately 157 lb (71 kg)
Docking Unit:
Approximately 11 lb (5 kg)
59 degrees F to 86 degrees F (15 degrees C to 30 degrees C)
30% - 80% relative humidity
2
) may be stackable, but is highly sensitive to curl, environmental conditions,
imagePRESS C910/C810/C710 Customer Expectations Document
Specification
84
2
2
to 400 g/m
)
Page 92
Advertisement
Table of Contents
