Table of Contents
Advertisement
IMPORTANT
• The imagePRESS C910/C810 large configuration includes the optional Duplex
Color Image Reader Unit-M1, POD Deck Lite XL-A1, Document Insertion
Unit-N1, Multi Function Professional Puncher-B1, Perfect Binder-E1, High
Capacity Stacker-H1, Paper Folding Unit-J1, Booklet Finisher-W1 PRO,
Booklet Trimmer-F1, and Two-Knife Booklet Trimmer-A1.
• The imagePRESS C710 large configuration includes the optional Duplex Color
Image Reader Unit-M1, Upright Control Panel-G1, Multi-Drawer Paper
Deck-C1, Document Insertion Unit-N1, Multi Function Professional Puncher-B1,
Paper Folding Unit-J1, and Booklet Finisher-AC1.
• The fully configured width of the machine includes opening space for the
POD Deck Lite XL-A1 and the extended tray of the Two-Knife Booklet Trimmer.
• There is approximately 1/5" (5 mm) of space in between each accessory
attached.
• When installing the Two-Knife Booklet Trimmer to the Booklet Trimmer-F1, the
optional Two-Knife Booklet Trimmer Conveyer is required.
• The optional SDD Square Fold Booklet-Maker with Two-Knife Trimmer is not
shown in the configuration diagrams above. If the SDD Square Fold
Booklet-Maker with Two-Knife Trimmer is attached to the machine, make sure
that there is approximately 62.6" (1,592 mm) of space added to the installation
space and floor design.
• The optional SDD Square Fold Booklet-Maker is not shown in the configuration
diagrams above. If the SDD Square Fold Booklet-Maker is attached to the
machine, make sure that there is approximately 43.3" (1,100 mm) of space
added to the installation space and floor design.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
imagePRESS C910/C810/C710 Customer Expectations Document
Page 36
Advertisement
Table of Contents
