Two-Knife Booklet Trimmer-A1 - Canon imagePRESS C910 Customer Expectation Document

6.31 Two-Knife Booklet Trimmer-A1

Item
Required Equipment
Margin Trimming Method
Maximum Number of
79, 80
Sheets
Acceptable Paper Sizes
Acceptable Paper Weights
Trimming Width
Trim Box Capacity
Conveyor Capacity
Power Source
Maximum Power
Consumption
Dimensions (W x D x H)
Weight
79 If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may be scratched. It is
recommended to use a thicker sheet for the cover sheet.
80 The maximum number of sheets that can be trimmed may differ, depending on the main machine.
81 The possible trim size may change, depending on the main machine.
82 The optional Two-Knife Booklet Trimmer Conveyor is required.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
Booklet Trimmer-F1
Upper knife, reciprocating top-bottom
50 sheets (20 lb bond (80 g/m
48 sheets (20 lb bond (80 g/m
81
13" x 19.2", 12" x 18", 11" x 17", LGL, LTRR
14 lb bond to 129 lb cover (52 to 350 g/m
Top-bottom: 0.08" to 0.59" (2 mm to 15 mm)
Minimum width of booklet in top and bottom directions: 7.48" (190 mm)
1,500 sheets of trimmed strips (width 0.59" (15 mm), LTR paper (20 lb bond (80 g/m
82
Conveyor belt - 30 booklets (40 sheets of an LTR booklet (20 lb bond (80 g/m
120 to 127 V AC, 50/60 Hz, 4 A
440 W
21.1" x 30.4" x 41" (536 mm x 770 mm x 1,040 mm)
(without conveyor and delivery trays)
Approximately 319 lb (145 kg) (without conveyor and delivery trays)
imagePRESS C910/C810/C710 Customer Expectations Document
Specifications
2
))
2
)) + 2 sheets (110 lb cover (300 g/m
2
)
2
))
2
))
2
))
Page 83