Table of Contents
Advertisement
6.39 DFD Adapter and Finisher Bridge Unit-A1 Specifications
The DFD Adapter and Finisher Bridge Unit-A1 are listed separately below;
however, they are sold together as one unit.
The DFD Adapter and Finisher Bridge Unit-A1 can connect to the imagePRESS
C910 and C810 only.
IMPORTANT
• When the DFD Adapter and Finisher Bridge-A1 is attached to the optional Staple
Finisher-W1 PRO or Booklet Finisher-W1 PRO, the top tray (Tray A) is removed,
and only the lower tray (Tray B) of the finisher is available to output sheets. Tray
B supports paper sizes of 7.16" x 7.16" to 13" x 19.2" (182 mm x 182 mm to
330.2 mm x 487.7 mm). Envelopes and small-size paper, such as STMT, are not
supported.
• The DFD Adapter and Finisher Bridge-A1 transports sheets to supported third
party accessories. The paper size depends on the supported paper size of the
connected third party accessory.
6.39.1 DFD Adapter-A1 Specifications
Item
Paper Weight
Connectivity
Power source
Dimensions (H x W x D)
Weight
Option
6.39.2 Finisher Bridge-A1 Specifications
Item
Paper Weight
Requirements
Connectivity
Dimensions (H x W x D)
Weight
101 Required when the DFD Adapter and Finisher Bridge Unit-A1 is configured with the SDD BLM300C Professional
Booklet Maker.
Version 5
imagePRESS C910/C810/C710 Customer Expectations Document
13 lb bond to 110 lb cover (50 to 300 g/m
29.3" (745 mm) paper path height (input)
33.8" (860 mm) paper output path CAN connection
100-240V, 50-60 Hz, 2A
Approximately 40.9" x 11.8" x 29.3" (1,040 mm x 300 mm x 745 mm)
Approximately 132 lb (60 kg)
Finisher Bridge Height Kit 1002-A1
13 lb bond to 110 lb cover (50 to 300 g/m
DFD Adapter-A1 and Staple/Booklet Finisher-W1 PRO
Requires the upper tray from the Finisher-W1 PRO to be removed and
replaced by the Finisher Bridge-A1.
Approximately 5.9" x 23.6" x 29.3" (150 mm x 600 mm x 745 mm)
Approximately 66 lb (30 kg)
imagePRESS C910/C810/C710 Customer Expectations Document
Specification
2
)
101
Specification
2
)
Page 96
Advertisement
Table of Contents
