Daikin Sensira Series Service Manual page 116

2 | Components
To install the swing flap motor
Service manual
116
b
a Cover
b Screw
c Swing flap motor
2 Disconnect the connector from the swing flap motor.
3 Remove the screw from the swing flap motor.
4 Remove the swing flap motor from the swing flap.
5 To install the swing flap motor, see
1 Install the swing flap motor in the correct location on the swing flap.
b
a Cover
b Screw
c Swing flap motor
2 Install and tighten the screw to fix the swing flap motor.
3 Connect the connector to the swing flap motor.
4 Install the cover.
Is the problem solved?
Yes
No
c a
"2.12.2 Repair
c a
Action
No further actions required.
Return to the troubleshooting of the
specific error and continue with the
next procedure.
FTXF20~71A + FTXF20~25B + FTXF20~42C + ATXF20~71A + ATXF20~42C
+ RXF20~71A + RXF20~60B + RXF20~42C + ARXF20~71A + ARXF20~42C
4
procedures" [ 115].
Split Sensira R32
ESIE18-12E – 2021.02