Brocade Communications Systems 53-1001763-02 Administrator's Manual page 551

FIGURE 81
1. Configure the IP address for each of the 7500s (L1 and R1):
2. Configure the management addresses for the 7500 L1.
3. Configure the management addresses for the 7500 R1.
Fabric OS Administrator's Guide
53-1001763-02
Management Station on a different subnet
a. On the 7500 L1, create an IP address on the GE interface:
switch:admin> portcfg ipif ge0 create 192.168.1.10 255.255.255.0 1500
b. On the 7500 R1, create an IP address on the GE interface:
switch:admin> portcfg ipif ge0 create 192.168.2.20 255.255.255.0 1500
a. Configure the internal addresses for the inbd devices for CP and GE port (GE port 0 for this
example).
switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0
b. Add the route on the switch going to the Management Station.
switch:admin> portcfg inbandmgmt ge0 routeadd 192.168.3.0 255.255.255.0
192.168.1.250
a. Configure the internal addresses for the inbd devices for CP and GE port (GE port 0 for this
example).
switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0
switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0
b. Add the route on the switch going to the Management Station.
Examples of supported configurations
B
511