Deleting An Admin Domain - Brocade Communications Systems 53-1001763-02 Administrator's Manual

3. Enter the ad
4. Enter the appropriate command based on whether you want to save or activate the Admin
Example

Deleting an Admin Domain

When you delete an Admin Domain, its devices no longer have access to the members of the zones
with which it was associated.
1. Connect to the switch and log in as admin.
2. Switch to the Admin Domain that you want to delete.
3. Enter the appropriate command to clear the zone database under the Admin Domain you want
4. Switch to the AD255 context.
5. Enter the ad
6. Enter the ad
Example
Fabric OS Administrator's Guide
53-1001763-02
Admin Domain management for physical fabric administrators
rename command with the present name and the new name.
--
ad --rename present_name new_name
Domain definition:
•
To save the Admin Domain definition, enter ad
•
To save the Admin Domain definition and directly apply the definition to the fabric, enter ad
apply.
--
The Admin Domain numbers remain unchanged after the operation.
The following example changes the name of Admin Domain Eng_AD to Eng_AD2.
switch:AD255:admin> ad --rename Eng_AD Eng_AD2
ad --select ad_id
to delete.
•
To remove the effective configuration, enter cfgdisable.
•
To remove the defined configuration, enter cfgclear.
•
To save the changes to nonvolatile memory, enter cfgsave.
ad --select 255
delete command.
--
ad --delete ad_id
The ad delete command prompts you for confirmation before triggering the deletion. The
--
command succeeds whether the Admin Domain is in an activated or deactivated state.
apply command to save the Admin Domain definition and directly apply the
--
definition to the fabric.
The following example deletes Admin Domain AD_B3.
switch:AD255:admin> ad --delete AD_B3
You are about to delete an AD.
This operation will fail if zone configuration exists in the AD
Do you want to delete 'AD_B3' admin domain (yes, y, no, n): [no] y
switch:AD255:admin>
save.
--
15
351