Brocade Communications Systems 53-1001763-02 Administrator's Manual page 519

6. Log in as admin to fabric2.
7.
8. Enter the zoneCreate command to create the LSAN lsan_zone_fabric2, which includes the host
9. Enter the cfgShow command to verify that the zones are correct.
10. Enter the cfgAdd and cfgEnable commands to create and enable the LSAN configuration.
11. Log in as an admin and connect to the FC router.
12. Enter the following commands to display information about the LSANs.
Fabric OS Administrator's Guide
53-1001763-02
Do you want to enable 'zone_cfg' configuration
zone config "zone_cfg" is in effect
Updating flash ...
Enter the nsShow command to list Target A (50:05:07:61:00:5b:62:ed) and Target B
(50:05:07:61:00:49:20:b4).
switch:admin> nsshow
{
Type Pid COS PortName
NL 0508e8; 3;
FC4s: FCP [IBM
Fabric Port Name: 20:08:00:05:1e:34:11:e5
Permanent Port Name: 50:05:07:61:00:5b:62:ed
NL 0508ef; 3;
FC4s: FCP [IBM
Fabric Port Name: 20:08:00:05:1e:34:11:e5
Permanent Port Name: 50:05:07:61:00:49:20:b4
The Local Name Server has 2 entries }
(10:00:00:00:c9:2b:6a:2c), Target A, and Target B.
switch:admin> zonecreate "lsan_zone_fabric2",
"10:00:00:00:c9:2b:c9:0c;50:05:07:61:00:5b:62:ed;50:05:07:61:00:49:20:b4"
switch:admin> cfgshow
Defined configuration:
zone: lsan_zone_fabric2
10:00:00:00:c9:2b:c9:0c; 50:05:07:61:00:5b:62:ed;
50:05:07:61:00:49:20:b4
Effective configuration:
no configuration in effect
switch:admin> cfgadd "zone_cfg", "lsan_zone_fabric2"
switch:admin> cfgenable "zone_cfg"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected.
Do you want to enable 'zone_cfg' configuration
zone config "zone_cfg" is in effect
Updating flash ...
•
lsanZoneShow -s shows the LSAN.
switch:admin> lsanzoneshow -s
Fabric ID: 2 Zone Name: lsan_zone_fabric2
10:00:00:00:c9:2b:c9:0c
50:05:07:61:00:5b:62:ed
50:05:07:61:00:49:20:b4
Fabric ID: 75 Zone Name: lsan_zone_fabric75
10:00:00:00:c9:2b:c9:0c
50:05:07:61:00:5b:62:ed
50:05:07:61:00:5b:62:ed;
DNEF-309170 F90F]
50:05:07:61:00:49:20:b4;
DNEF-309170 F90F]
Imported
EXIST
EXIST
EXIST
Imported
LSAN zone configuration
(yes, y, no, n): [no] y
NodeName
50:05:07:61:00:1b:62:ed; na
50:05:07:61:00:09:20:b4; na
(yes, y, no, n): [no] y
21
TTL(sec)
479