Deleting An Alias; Viewing An Alias In The Defined Configuration - Brocade Communications Systems 53-1001763-02 Administrator's Manual

Brocade communications systems iron user manual
Table of Contents

Advertisement

11
Zone aliases
Example

Deleting an alias

1. Connect to the switch and log in as admin.
2. Enter the aliDelete command, using the following syntax.
3. Enter the cfgSave command to save the change to the defined configuration.
Example

Viewing an alias in the defined configuration

1. Connect to the switch and log in as admin.
2. Enter the aliShow command, using the following syntax
Example
248
switch:admin> aliremove "array1", "1,2"
switch:admin> aliremove "array2", "21:00:00:20:37:0c:72:51"
switch:admin> aliremove "loop1", "4,6"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
alidelete "aliasname"
The cfgSave command ends and commits the current zoning transaction buffer to nonvolatile
memory. If a transaction is open on a different switch in the fabric when this command is run,
the transaction on the other switch is automatically aborted. A message displays on the other
switches to indicate that the transaction was aborted.
switch:admin> alidelete "array1"
switch:admin> cfgsave
You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y
alishow "pattern"[, mode]
If no parameters are specified, the entire zone database (both the defined and effective
configuration) is displayed.
The following example shows all zone aliases beginning with "arr".
switch:admin> alishow "arr*"
alias: array1
21:00:00:20:37:0c:76:8c
alias: array2
21:00:00:20:37:0c:66:23
Fabric OS Administrator's Guide
53-1001763-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents