Brocade Communications Systems 53-1001763-02 Administrator's Manual page 248

9
Validating a firmware download
firmwareDownloadStatus
nsShow
nsAllShow
fabricShow
208
ecp:admin> firmwareshow
Slot Name Appl
------------------------------------------------------------------------
6 CP0 FOS
7 CP1 FOS
* Local CP
Displays an event log that records the progress and status of events during Fabric
OS, SAS, and SA firmwareDownload. The event log is created by the current
firmwareDownload command and is kept until another firmwareDownload
command is issued. There is a timestamp associated with each event. When
downloading SAS or SA in systems with two control processor (CP) cards, you can
only run this command on the active CP. When downloading Fabric OS, the event
logs in the two CPs are synchronized. This command can be run from either CP.
Displays all devices directly connected to the switch that have logged into the
name server. Make sure the number of attached devices after the firmware
download is exactly the same as the number of attached devices prior to the
firmware download.
Displays all devices connected to a fabric. Make sure the number of attached
devices after the firmware download is exactly the same as the number of
attached devices prior to the firmware download.
Displays all switches in a fabric. Make sure the number of switches in the fabric
after the firmware download is exactly the same as the number of attached
devices prior to the firmware download.
Primary/Secondary Versions
v6.4.0
v6.4.0
v6.4.0
v6.4.0
Status
ACTIVE *
STANDBY
Fabric OS Administrator's Guide
53-1001763-02