Table 78 License Requirements - Brocade Communications Systems 53-1001763-02 Administrator's Manual

16
Licensing overview
TABLE 78
Feature
Ports
QoS
QoS on an HBA
RADIUS
RBAC
Routing traffic
Security
SNMP
Speed
SSH public key
Top Talkers
Traffic Isolation
Trunking
Two-to-four domains in a
fabric
USB usage
Virtual Fabrics
Web Tools
Zoning
370
License requirements (Continued)
License
Ports on demand licenses. This license applies
to a select set of switches.
Upgrade license for the 7500E and 7800
switches to use all ports.
10 Gigabit Ethernet license to use 10GbE ports
on FX8-24 blade.
Brocade 8000 – Must have license installed to
enable the 8 FC ports. A maximum of 8 FC
ports are allowed.
Adaptive Networking
Server Application Optimization and
Adaptive Networking
No license required.
No license required.
No license required.
This includes port-based or exchanged-based
routing, static routes, frame-order deliver, and
dynamic routes.
No license required.
Includes the DCC, SCC, FCS, IP Filter, and
authentication policies.
No license required.
8 Gbps license needed to support 8 Gbps on
the Brocade 300, 5100, 5300, and VA-40FC
switches and embedded switches only.
NOTE: This license is installed by default and
you should not remove it.
No license required.
Advanced Performance Monitoring
No license required.
ISL Trunking or
ISL Trunking Over Extended Fabric
Value Line (Two/Four)
No license required.
No license required.
No license required.
No license required.
Where license should be installed
Local switch.
Local switch and attached switches.
Local switch
n/a
n/a
n/a
n/a
n/a
Local switch
n/a
Local switch and attached switches.
n/a
Local and attached switches.
s
Local switch. May be required on
attached switches.
n/a
n/a
Local and any switch you want to
manage using Web Tools.
n/a
Fabric OS Administrator's Guide
53-1001763-02