Brocade Communications Systems 53-1001763-02 Administrator's Manual page 164

Brocade communications systems iron user manual
Table of Contents

Advertisement

6
Secure Sockets Layer protocol
Generating a public and private key
Perform this procedure on each switch.
1. Connect to the switch and log in as admin.
2. Enter the secCertUtil genkey command to generate a public/private key pair.
3. Respond to the prompts to continue and select the key size.
Generating and storing a CSR
After generating a public/private key, perform this procedure on each switch.
1. Connect to the switch and log in as admin.
2. Enter the secCertUtil gencsr command.
3. Enter the requested information.
4. Enter the secCertUtil export command to store the CSR:
5. Enter the requested information. You can use either FTP or SCP.
124
The system reports that this process will disable secure protocols, delete any existing CSR, and
delete any existing certificates.
Example of generating a key
Continue (yes, y, no, n): [no] y
Select key size [1024 or 2048]: 1024
Generating new rsa public/private key pair
Done.
Because CA support for the 2048-bit key size is limited, you should select 1024 in most cases.
Example of generating a CSR
Country Name (2 letter code, eg, US):US
State or Province Name (full name, eg, California):California
Locality Name (eg, city name):San Jose
Organization Name (eg, company name):Brocade
Organizational Unit Name (eg, department name):Eng
Common Name (Fully qualified Domain Name, or IP address): 192.1.2.3
Generating CSR, file name is: 192.1.2.3.csr
Done.
Your CA may require specific codes for Country, State or Province, Locality, Organization, and
Organizational Unit names. Make sure that your spelling is correct and matches the CA
requirements. If the CA requires that the Common Name be specified as an FQDN, make sure
that the fully qualified domain name is set on the domain name server. The IP address or
FQDN will be the server where the certificate will be put on.
Example of exporting a CSR
Select protocol [ftp or scp]: ftp
Enter IP address: 192.1.2.3
Enter remote directory: path_to_remote_directory
Enter Login Name: your account
Enter Password: your password
Success: exported CSR.
Fabric OS Administrator's Guide
53-1001763-02

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents