Brocade Communications Systems 53-1001763-02 Administrator's Manual page 524

21
LSAN zone configuration
4. Enter the following command to enable the FC router:
5. Change the names of the LSAN zones in the edge fabrics to incorporate the tag in the names.
Example
Configuring a Speed LSAN tag
1. Log in to the FC router as admin.
2. Enter the following command to create a Speed LSAN tag:
3. Change the names of the LSAN zones in the edge fabrics to incorporate the tag in the names.
4. Toggle the host or target port to trigger the fast import process.
Example
Removing an LSAN tag
Use the following procedure to remove an LSAN tag. This procedure does not remove the LSAN
zone; it just deactivates the tag so that LSAN zones with this tag in the name now behave as
regular LSAN zones.
You must disable the switch before removing an Enforce LSAN tag. You do not need to disable the
switch to remove a Speed LSAN tag.
1. Log in to the FC router as admin.
2. Enter the fcrlsan
Example of removing an Enforce LSAN tag
Example of removing a Speed LSAN tag
Displaying the LSAN tag configuration
1. Log in to the FC router as admin.
2. Enter the fcrlsan
484
switchenable
sw0:admin> switchdisable
sw0:admin> fcrlsan --add -enforce enftag1
LSAN tag set successfully
sw0:admin> switchenable
fcrlsan --add -speed tagname
where tagname is the name of the LSAN tag you want to create.
sw0:admin> fcrlsan --add -speed fasttag2
LSAN tag set successfully
remove command to remove an existing LSAN tag.
--
If you remove an Enforce LSAN tag, you must disable the switch first.
sw0:admin> switchdisable
sw0:admin> fcrlsan --remove -enforce enftag1
LSAN tag removed successfully
sw0:admin> switchenable
sw0:admin> fcrlsan --remove -speed fasttag2
LSAN tag removed successfully
show command.
--
Fabric OS Administrator's Guide
53-1001763-02