Mitsubishi Electric MELSERVO-J2-Super Series Instruction Manual page 218

7. SERVO CONFIGURATION SOFTWARE
When the above choices are made, the following window appears:
a)
b)
c)
(1) Servo motor speed setting ( a) )
Enter a new value into the "Motor speed" input field and press the enter key.
(2) Acceleration/deceleration time constant setting ( b) )
Enter a new value into the "Accel/decel time" input field and press the enter key.
(3) Moving distance setting ( c) )
Enter a new value into the "Move distance" input field and press the enter key.
(4) Servo motor start ( d), e) )
Click the "Forward" button to rotate the servo motor in the forward rotation direction.
Click the "Reverse" button to rotate the servo motor in the reverse rotation direction.
(5) Temporary stop of servo motor ( f) )
Click the "Pause" button to stop the servo motor temporarily.
Click the "Forward" and "Reverse" buttons to resume rotation.
(6) Positioning operation window closing ( g) )
Click the "Close" button to cancel the positioning operation mode and close the window.
(7) Cancel of positioning operation
To cancel positioning operation, switch off the power of the servo amplifier.
7 - 15
d)
e)
f)
g)