Continuous Operation Program Example; System Configuration Example When 1 Station Is Occupied - Mitsubishi Electric MELSERVO-J2-Super Series Instruction Manual

3. CC-Link COMMUNICATION FUNCTIONS

3.8 Continuous operation program example

This section shows a program example which includes a series of communication operations from a servo
start. The program will be described on the basis of the equipment makeup shown in Section 3.8.1, 3.8.3.

3.8.1 System configuration example when 1 station is occupied

As shown below, the CC-Link system master local unit is loaded to run one servo amplifier (1 station
occupied).
PLC
Power
CPU
supply
3 - 52
Master station Input module
(X/Y00 to 1F)
(X30 to X3F)
Station No. 1
Servo amplifier
(1 station occupied)