Konica Minolta CM-36d Instruction Manual page 3

Table of Contents

Advertisement

Safety Precautions
To ensure correct use of this instrument, read the following points carefully and adhere to them. After you have
read this manual, keep it in a safe place where it can be referred to anytime a question arises.
WARNING
Do not use the instrument in places where flammable or combustible gases (gasoline, etc.) are
present.
Doing so may cause a fire.
Always use the AC adapter (AC-A312F) that was supplied as a standard accessory, and connect it to
a 100 V
(50/60 Hz) AC outlet. If an AC adapter other than those specified by KONICA MINOLTA
is used, or if the adapter is connected to an unsupported voltage, it may result in damage to the
adapter, fire, or electric shock.
If the instrument will not be used for a long time, disconnect the AC adapter power plug from the
AC outlet. Accumulated dirt or water on the prongs of the AC adapter's plug may cause a fire. Clean
off any dirt or water on the prongs of the AC adapter's plug before use.
Do not insert or disconnect the AC adapter plug with wet hands. Doing so may cause electric shock.
Do not disassemble or modify the instrument or the AC adapter. Doing so may cause a fire or
electric shock.
The instrument should not be operated if it or the AC adapter is damaged, or if smoke or abnormal
odor occurs. Doing so may cause a fire. In such situations, turn the power OFF immediately,
disconnect the AC adapter plug from the AC outlet, and contact the nearest KONICA MINOLTA-
authorized service facility.
Do not allow liquid or metal objects to enter the instrument and the AC adapter. Doing so may cause
a fire or electric shock. Should liquid or metal objects enter the instrument, turn the power OFF
immediately, disconnect the AC adapter power plug from the AC outlet, and contact the nearest
KONICA MINOLTA-authorized service facility.
Do not forcibly bend, twist, or pull the cords or cables. Also, do not scratch, modify, or place heavy
objects on the cables. Doing so may damage the cable and cause a fire or electric shock.
Always grasp the power plug itself when disconnecting the power cable from an outlet. Pulling on
the power cable may damage it and cause a fire or electric shock.
Firmly push the AC adapter power plug completely into the outlet. Incomplete insertion may cause
a fire or electric shock.
Do not look directly at the lamp. The lamp is extremely bright and emits ultraviolet rays. Looking
directly at the light may injure the eyes.
(Failure to adhere to the following points may result in death or serious injury.)
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cm-36dg

Table of Contents