Names And Functions Of Parts - Konica Minolta CM-36d Instruction Manual

Names and Functions of Parts

④
Transmittance specimen chamber
Target mask �����������Select an illumination area of ø30 mm (LAV), ø20 mm (LMAV)
Sample holder ����������Installs the reflectance measurement specimen, white calibration plate, or
Jig mounting screw holes ����These screw holes are used to mount jigs or other components for fastening
Transmittance specimen chamber cover
USB connection terminal (B type) �Used to connect the instrument to a computer with the supplied USB cable
AC adapter input terminal ���Connects the provided AC adapter.
①
④
²
�Used to install samples when performing transmittance measurement.
(MAV), or ø7 mm (SAV) according to the specimen to be measured, and
install into the instrument.
gloss calibration plate.
the specimen.
²
�Used to open and close the transmittance specimen chamber.
(IF-A17).
⑤
②
③
14
⑥ ⑦
²
, ø11 mm