Table of Contents
Advertisement
Indicators
Status panel and operation keys
Operation keys
Power key
Used to turn the power ON/OFF. The instrument switches between ON/OFF every time the
power key is pressed.
The lamp illuminates blue when the power is ON.
ON: Press once.
OFF: Press and hold.
Notes
Measurement key When the PC software was connected and a remote trigger was set, it becomes possible to
perform measurement on the instrument side.
Illuminated (blue):
Illuminated (orange):
Not illuminated:
Status panel
The LED illuminates to indicate the measurement mode that was set with the PC software.
Measurement mode
Measurement area
Reflectance/transmittance
measurement mode
Communication status
(
²
)
• While the LED is flashing, the power ON/OFF process is in progress. Do not unplug the
AC adapter.
Indicates that measurement is possible.
Indicates that calibration has not been completed.
Indicates measurement is in progress or the power is OFF
²
60° gloss
SCI
SCE
LAV
²
LMAV
MAV
SAV
Reflectance measurement
Transmittance measurement
The LED illuminates when the product is connected to the computer (connected
to the PC software).
16
(
²
)
(
²
)
²
²
(
)
CM-36dG only
Advertisement
Table of Contents
