Table of Contents
Advertisement
Accessories
Standard and optional accessories are available with the instrument.
Memo
The shape of some products may be different from those shown.
²
(
)
indicates an accessory only for the CM-36dG.
Standard Accessories
White Calibration Plate CM-A288
Used to perform white calibration.
Memo
When the plate is not being used, close the cover to prevent
the plate from becoming dusty or scratched and to protect it
from external light.
Gloss Calibration Plate CM-A289
Used to perform gloss calibration.
Memo
When the plate is not being used, close the cover to prevent
the plate from becoming dusty or scratched and to protect it
from external light.
Zero Calibration Box CM-A290
Used to perform zero calibration for reflectance measurement
and gloss measurement, and to perform haze measurement for
transmittance measurement.
Target Mask
CM-A291/A292/A293/A294
This is used to change the illumination area (specimen
measuring port size) according to the specimen. Each target
mask measurement area/illumination area (specimen
measuring port size) is as shown below.
CM-A291 (LAV)
: ø25.4 mm/ø30 mm
²
CM-A292 (LMAV)
(
)
: ø16 mm/ø20 mm
CM-A293 (MAV)
: ø8 mm/ø11 mm
CM-A294 (SAV)
: ø4 mm/ø7 mm
AC Adapter AC-A312F
(ATS036T-A120 )
This connects to an AC outlet using an AC cable and supplies
power to the instrument.
Input: 100 to 240 V
50/60 Hz
31 to 43 VA 0.31 to 0.18 A
Output: 12 V
3 A
Plug design:
²
(
)
Center-positive
9
Advertisement
Table of Contents
