FUJITSU DL3100
CUSTOMIZE
FANFOLD
PAGE
FORMATTING
PARAMETERS
6-6
The customizations of the form length, TOF, bottom and left
margins for fanfold are exactly the same as describe. All you
need is to bypass the Single Sheet menu under Customize
Form. Follow step 1 in section 6.1:
Customize Form
[LF]=Next, [TEAR]=Back, [LOAD/EJECT]=OK, [ONLINE]=Exit,
[ONLINE]+[LOAD/EJECT]=Save and restart the printer.
Single sheet
Then hit "Next" instead to get into the fanfold parameter
menus:
[Tractor Paper]
Form Length
Refer section 6.1 to 6.4 for details on customizing the form
length, TOF, bottom margin, and left margin for fanfold.
User's Manual