Fujitsu DL3100 User Manual page 123

FUJITSU DL3100
Printing is vertically misaligned
(jagged).
The top margin is wrong.
Lines are double spaced instead
of single spaced
The printer overprints on the
same line.
The next print line starts where
the previous line ended instead
of at the left margin.
User's Manual
Problem Solution
Use the printer's vertical alignment

function to check the vertical print
alignment. If necessary, adjust the
print alignment.
Check whether the application top

margin setting and the setting of
top margin is correct,and enter the
margin setting again.
Adjust the Top Margin setting in

Page Setup menu if necessary.
Change the Auto LF setting in the

System Setup menu to No.
Change the Auto CR setting in the

System Setup menu to No.
Change the Auto CR setting in the

System Setup menu to Yes.
8-3