Connecting The Power Supply - Fujitsu DL3100 User Manual

FUJITSU DL3100
CONNECTING
THE POWER
SUPPLY
User's Manual
Checking the printer voltage
Make sure that the device has been set according to your
country's power supply voltage. To do this, check the rating
plate at the back of the printer. Contact your dealer if the
setting is incorrect.
Never switch on the printer if the voltage setting is
incorrect; This may result in electrical damage to the
printer.
Make sure that the power switch is in the "O" (off) position.
Connect the power cord to the power inlet of the printer.
Connect the power cord plug to a mains socket. Switch on
the printer.
2-7