Fujitsu DL3100 User Manual page 161

FUJITSU DL3100
Select 60-dpi graphics
Prints bit-image graphics in 8-dot columns, at a density
of 60 horizontal by 60 vertical dpi,according to the
following parameters:
nL, nH Specify the total number of columns (k) of
graphics data following,according to the formula
k = ((nH × 256) + nL)
d1 . . . dk Bytes of graphics data
(0 ≤ nL ≤ 255,0 ≤ nH ≤ 31,0 ≤ d ≤ 255)
Notes
• The ESC * 0 command is identical to this command;
use ESC * 0 instead of this command.
• The dot density printed with this command can be
redefined with the ESC ? command.
Select 120-dpi graphics
Prints bit-image graphics in 8-dot columns, at a density
of 120 horizontal by 60 vertical dpi,according to the
following parameters:
nL, nH Specify the total number of columns (k) of
graphics data following,according to the formula
k = ((nH × 256) + nL)
d1 . . . dk Bytes of graphics data
(0 ≤ nL ≤ 255, 0 ≤ nH ≤ 31, 0 ≤ d ≤ 255)
Notes
• The ESC * 1 command is identical to this command;
use ESC * 1 instead of this command.
• The dot density printed with this command can be
redefined with the ESC ? command.
User's Manual
Function
nH = INT(k/256)
nL = MOD(k/256)
nH = INT(k/256)
nL = MOD(k/256)
Command
ESC K (nL nH
d1 d2 . . . dk)
ESC L (nL nH
d1 d2 . . . dk)
C-21