Fujitsu DL3100 User Manual page 157

FUJITSU DL3100
Set bottom margin
Sets the bottom margin on continuous paper to n lines
(in the current line spacing) from the top-of-form
position on the next page.
(0 < n ≤ 127, 0 < (current line spacing) × n < (page
length))
Cancel bottom margin
Set right margin
Sets the right margin to n columns in the current
character pitch, as measured from the left most printable
column
(1 ≤ n ≤ 255)
(left margin) < (current pitch) × n ≤ (printable area
width)
Set left margin
Sets the left margin to n columns in the current character
pitch, as measured from the left most printable column
(1 ≤ n ≤ 255)
0 ≤ (left margin) <(right margin)
Control-code character printing
Print data as characters
• Prints data bytes d1 through dk as characters, not
control codes
• The amount of data to be sent is calculated as follows:
k = ((nH × 256) + nL)
(0 ≤ nH ≤ 127, 0 ≤ nL ≤ 255)
Enable printing of upper control codes
Tells the printer to treat codes from 128 to 159 as
printable characters instead of control codes
Enable upper control codes
Tells the printer to treat codes from 128 to 159 as control
codes instead of printable characters
User's Manual
Function Command
ESC N (n)
ESC O
ESC Q (n)
ESC l (n)
ESC ( ^ (nL)
(nH) (d1 . . .
dk)
ESC 6
ESC 7
C-17